International Research journal of Management Science and Technology

  ISSN 2250 - 1959 (online) ISSN 2348 - 9367 (Print) New DOI : 10.32804/IRJMST

Impact Factor* - 6.2311


**Need Help in Content editing, Data Analysis.

Research Gateway

Adv For Editing Content

   No of Download : 262    Submit Your Rating     Cite This   Download        Certificate

SYNTHESIS, CHARACTERIZATION, SIMULATION AND ANALYSIS OF METAL MATRIX COMPOSITE SYSTEM.

    2 Author(s):  DR. C N CHANDRAPPA, R. KUMAR

Vol -  8, Issue- 8 ,         Page(s) : 54 - 61  (2017 ) DOI : https://doi.org/10.32804/IRJMST

Abstract

In the present industrial scenario composite material are given the first preference due to its high strength and less weight ratio. Conventional materials like steel, brass, and aluminum etc. Will fail without any indication, crack initiation; propagation will take place within short span. To overcome this problem conventional materials are replace by aluminum alloy and its composites. In this project work Aluminum Alloy 6061 is selected as matrix material and Silicon Carbide as reinforcement material based on literature review. Fabrication of composite is done by Stir Casting method. Tensile specimens are prepared according to ASTM E08M standards and testing was done under tensometer at room temperature. Finite element method (FEM) is used to simulate the tensile test in ANSYS workbench to identify the occurrence of stress distribution, deformation and elongation etc., without investing much during the initial phase of the product development. Validation of mechanical results with analytical result is done to know the percentage of error associated. Statistical tools like correlation and regression is used to generate regression equation to predict the unknown properties (output) by varying the input variables.

  1. C. Rajaravi, P.R. Lakshminarayanan “Analysis of Tensile Strength of Al/TiB2 MMCs in FEA for Different Mould Conditions” IORS-JMCE Volume 13, Issue May –June 2016.
  2. Neelima Devi. C, Mahesh. V, Selvaraj. N “Mechanical Characterization of Aluminium Silicon Carbide Composite” International Journal of Applied Engineering Research, Dindigul, Volume 1, Issue March 2011.
  3. Rajendra Singh, Yogesh Sharma, Vikas Sharma “Examine of Mechanical Properties of Al 6061/SiC Metal Matrix Composites” JRPS volume 05, Issue March-July 2014.
  4. R. Kumar, J. Jegan, L. Initha “Processing of Aluminium Metal Matrix Composites (AMMC) Through Stir Casting Route” International Journal of Research in Mechanical Engineering, volume 2, Issue Dec 2014.
  5. V. Suresh, R. Maguteeswaran, R. Sivasubrramanaiam, D. Shanmuga Vadivel “Micro Tensile Behavior of LM 25 Aluminium Alloy by Stir Cast Method Compared with Finite Element Method” International Journal of Research in Mechanical Engineering, Volume 1, Issue 1, July-Sept 2013.
  6. Rohit Sharama, Saurabh Jha. P, Khushboo Kakkar, Kushal Kamboj, Pradeep Sharma “A Review of Aluminium Metal Matrix Composite and Its Properties” IRJET volume 04, issue 02/02/2017.
  7. Bartakke Nikhal. N, Chivalkar Amey. A, Devrukhkar Vaibhav. L, Lamsutkar Sahil. R, Rajnitu Rakshaskar “Mechanical Property Analysis of Aluminum Alumina Composite by Varying the Percentage of Alumina” Proceedings of IRF-Ieeeforum International Conference, Pune, India, 03/04/2016. 
  8. S. Krishnaraj, G. Elatharasan “Experimental and Numerical Investigation of Al 6061 Alloy Reinforced with SiC-TiO2” International Journal of Mechanical and Production Engineering, Volume 04, Issue 11/11/2016.
  9. Preetam Kulkarni “Evaluation of Mechanical Properties of Al 2024 Based Hybrid Metal Composites” IOSR-JMCE Volume 12, Issue Sept-Oct 2015.
  10. S. Muniaraj, P. Senthil Kumar “Experimental Analysis of Compressive Stress-Strain Rates and Mechanical Properties of Al 6061 and Al 6061-SiC” IJLTET volume 6, Issue 04/03/2016.
  11. Krishna, Karthik. M “Evaluation of Hardness Strength of Aluminium Alloy (AA 6061) Reinforcement with Silicon Carbide” IJRMEE volume 1, Issue Nov 2014.
  12. Surya Kumar “Analysis and Testing of Aluminium Silicon Carbide Metal Matrix Composites” PARIPEX Indian Journal Of Research, Volume 4, Issue 8/8/2015.
  13. Mahendra Boopathi. M, K. P. Arulshri and N. Iyandurai “Evaluation of Mechanical Properties of Aluminum Alloy 2024 Reinforced With Silicon Carbide and Fly Ash Hybrid Metal Matrix Composites” American Journal of Applied Sciences.
  14. S. Vijayakumar, M. Souhdarrajan, P. Palanisamy, K. Pasupathi “Studies on Mechanical Properties of Al-Sic Metal Matrix Composite” SSRG-IJMSE Volume 2, Issue Nov-Dec 2013.
  15. Amardeep Singh, Ajay Singh Rana and Niraj Bala “Study of Wear Behavior of Aluminium Based Composite Fabricated by Stir Casting Technique” IJMERR Volume 4, Issue Jan 2015.
  16. V. Ramakoteswara Rao, N. Ramanaiah and M.M.M. Sarcar “Tribological Properties of Aluminum Metal Matrix Composites (AA 7075 Reinforced with Titanium Carbide (TiC) Particles)” International Journal of Advance Science and Technology, Volume 88, Issue 2016.
  17. N. Radhika, A. Vaishnavi and G. K. Chandran “Optimization of Dry Sliding Wear Process Parameters for Aluminium Hybrid Metal Matrix Composites” www.tribology.fink.rs Volume 36, Issue 2014.
  18. Manoj Singla, Lakhvir Singh and Vikas Chawala “Study of Wear Properties of AlSiC Composites” Journal of Minerals and Materials Characterization and Engineering Volume 8, Issue 2009.
  19. T. R. Hemanth Kumar, R. P. Swamy and T. k. Chandrashekar “An Experimental Investigation on Wear Test Parameter of Metal Matrix Composites Using Taguchi Technique” Indian Journal of Engineering and Materials Sciences, Volume 20, Issue Aug 2013. 
  20. Lal Krishna S. K, Arun. M and Sndeep. P “Development of Silicon Carbide Reinforced Aluminium Composite for Hydraulic Actuators in Space Applications” IMPACT-IJRET Volume 3, Issue 8/8/2015. 
  21. Kanak Kalita, Rakesh Chaudhari and M. Ramachandra “Mechanical Characterization and Finite Element Investigation on Properties of PLA-Jute Composite” International Journal of Computer Applications Volume 123, Issue Aug 2015. 
  22. N. Esmaeil, J. L. Alves and C. Teodosiu “Simulation Of Vickers Micro Indentation Test On Dual Phase Steel Utilizing VCAD Based Software” Manufacturing Process Simulation Team, VCAD System Research 2009.

*Contents are provided by Authors of articles. Please contact us if you having any query.






Bank Details